Search





中文 English

Product Center

Homepage

Product center

VA Flow Switches

Flow switch type III

Products

Compact DP Flow Monitors

VA Flow Switches

TIVG Flow Indicator

Electromagnetic Flowmeter

Metal Tube Rotameter

Other Flowmeters and Swithes

Pressure Transmitters

DP Transmitters

Level Measurement

Underwater Clean & Analysis

Cooling solution

All categories



浏览量:

1000

Flow switch type III

The Flow Switch is able to fit small flow and line sizes. These switches work on the principle of variable flow area where the alarm switch point is allowed to bet set at a very low flow and still the switch is capable of handling large flows without creating a large pressure drop

零售价

0.0

元

市场价

0.0

元

浏览量:

1000

产品编号

Category： VA Flow Switches

数量

库存:

所属分类

VA Flow Switches



Message

Details

[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[产品参数, 参数]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

Product Introduction

Rugged and sturdy design

Insensitive to magnetic fields

Simple and economical installation

One adjustable SPDT micro switch for flow alarm

Can be mounted horizontally or vertically

Can be used in any liquid

Function based on flow and not affected by the static line pressure

Technical specifications

Flow range: 0 – 3,5 m/s. Max flow limited by pump capacity and acceptable pressure drop

Min switch point: 1,5 l/min

Max. switch point: 30 l/min

Wetted materials: De-zincificated copper alloy, stainless steel 316 and PTFE

Rubber parts: Nitrile (HNBR)

Max. pressure: 25 bar (363 PSI)

Process connection: DN15 (BSP1 1/2”) female; DN20 (BSP 3/4” ) male

Alarm one (1) micro switch contact, adjustable to trip within the above mentioned min/max switch point

Nothing

Flow switch IIIa type

Related products

Vortex Street Flowmeter

As a kind of velocity flowmeter, vortex flowmeter is widely used in petroleum, chemical industry, electric power, light industry and power heating.

Mechanical Type I

The Eletta Flow Monitors function is based on the proven and dependable differential pressure principle. This is perhaps the oldest and most widely used principle for flow metering, mainly because of its simplicity and its relatively low cost.

Mechanical Type II

Electronic Type I

Electronic Type II

Electronic Type III

Electronic Type IV

Pipe Sections

The Instrument consists of two parts mainly, i.e. the Pipe Section and the Control Unit. The Pipe Section is the part that is to be mounted in the process pipe and the Control Unit is mounted directly (standard) or remote to the Pipe Section.

New！coming soon...



