×

Search

Search

产品中心

product center

Product Center

All categories
浏览量:
1000

Low Flow Switch

Low cost micro variable area flow switch. The float is controlled by a spring in a cylindrical measuring tube. The passing medium pushes the float in the di-rection of flow. The reed contacts on the outside of the measuring tube are sealed. When the float reaches the reed contact, the switch closes. When the flow increases, the float continues to move upward until the built-in float baffle, while keeping the switch closed, thus ensuring that the function of the bistable switch can be realized at any time. Reed contact can be adjusted in all switching range of the instrument.
零售价
0.0
市场价
0.0
浏览量:
1000
产品编号
Category: VA Flow Switches
数量
-
+
库存:
所属分类
VA Flow Switches
1
Message
Details
[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[产品参数, 参数]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

Product features

All in stainless steel materials

Could be installed at any position

Small in size

High precision switch

applicable for low viscosity liquid

low hysteresis

Technical specifications

Maximum pressure: 350 bar

Minimum measurement range: 0.1-0.6 l/min. (G1/4 ")

Material: 1.4571; Magnetic material: ferrite

未找到相应参数组,请于后台属性模板中添加
Next

Related products

 Vortex Street Flowmeter
Vortex Street Flowmeter
As a kind of velocity flowmeter, vortex flowmeter is widely used in petroleum, chemical industry, electric power, light industry and power heating.
 Mechanical Type I
Mechanical Type I
The Eletta Flow Monitors function is based on the proven and dependable differential pressure principle. This is perhaps the oldest and most widely used principle for flow metering, mainly because of its simplicity and its relatively low cost.
 Mechanical Type II
Mechanical Type II
The Eletta Flow Monitors function is based on the proven and dependable differential pressure principle. This is perhaps the oldest and most widely used principle for flow metering, mainly because of its simplicity and its relatively low cost.
 Electronic Type I
Electronic Type I
The Eletta Flow Monitors function is based on the proven and dependable differential pressure principle. This is perhaps the oldest and most widely used principle for flow metering, mainly because of its simplicity and its relatively low cost.
 Electronic Type II
Electronic Type II
The Eletta Flow Monitors function is based on the proven and dependable differential pressure principle. This is perhaps the oldest and most widely used principle for flow metering, mainly because of its simplicity and its relatively low cost.
 Electronic Type III
Electronic Type III
The Eletta Flow Monitors function is based on the proven and dependable differential pressure principle. This is perhaps the oldest and most widely used principle for flow metering, mainly because of its simplicity and its relatively low cost.
 Electronic Type IV
Electronic Type IV
The Eletta Flow Monitors function is based on the proven and dependable differential pressure principle. This is perhaps the oldest and most widely used principle for flow metering, mainly because of its simplicity and its relatively low cost.
 Pipe Sections
Pipe Sections
The Instrument consists of two parts mainly, i.e. the Pipe Section and the Control Unit. The Pipe Section is the part that is to be mounted in the process pipe and the Control Unit is mounted directly (standard) or remote to the Pipe Section.
 New!coming soon...
New!coming soon...
New!coming soon...

Message

Need to leave a message

Username used for comment:
客户留言
Description:
Verification Code
×

CopyRight © 2022 Elita (Beijing) Instrument Co., Ltd. All Rights Reserved.