×

Search

Search
中文 English

产品中心

product center

Product Center

Homepage
/
Product center
/
Other Flowmeters and Swithes
/
Flow Switch PR1

Products

Products

Compact DP Flow Monitors
VA Flow Switches
TIVG Flow Indicator
Electromagnetic Flowmeter
Metal Tube Rotameter
Other Flowmeters and Swithes
Pressure Transmitters
DP Transmitters
Level Measurement
Underwater Clean & Analysis
Cooling solution
All categories
浏览量:
1000

Flow Switch PR1

Liquid Paddle Switch, control of flow or no-flow conditions
零售价
0.0
元
市场价
0.0
元
浏览量:
1000
产品编号
Category： Other Flowmeters and Swithes
数量
-
+
库存:
所属分类
Other Flowmeters and Swithes
1
Message
Details
[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[产品参数, 参数]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

Product Introduction

The Eletta PR1 Paddle Switch is using the liquid flow to activate the spring supported paddle and the micro-switch to give

an alarm if the flow stops or starts.

PR1 can be used in pipe sizes from DN50 to DN250 and the set point is dependent on the length of the paddle and the

pipe size

The installation is simple as you can cut the paddle to the desired length on site according to the actual pipe size.

The paddle aligns fully with the flow and creates a very small pressure drop.

The function works only in one flow direction.

Wetted parts is made of Copper Alloy and Stainless Steel and the sealing of Nitrile (HNBR).

Process Connection: BSP 1"

未找到相应参数组，请于后台属性模板中添加
Prev
Gas turbine flowmeter
Next
Target Flow Switch

Related products

Vortex Street Flowmeter
Vortex Street Flowmeter
As a kind of velocity flowmeter, vortex flowmeter is widely used in petroleum, chemical industry, electric power, light industry and power heating.
Mechanical Type I
Mechanical Type I
The Eletta Flow Monitors function is based on the proven and dependable differential pressure principle. This is perhaps the oldest and most widely used principle for flow metering, mainly because of its simplicity and its relatively low cost.
Mechanical Type II
Mechanical Type II
The Eletta Flow Monitors function is based on the proven and dependable differential pressure principle. This is perhaps the oldest and most widely used principle for flow metering, mainly because of its simplicity and its relatively low cost.
Electronic Type I
Electronic Type I
The Eletta Flow Monitors function is based on the proven and dependable differential pressure principle. This is perhaps the oldest and most widely used principle for flow metering, mainly because of its simplicity and its relatively low cost.
Electronic Type II
Electronic Type II
The Eletta Flow Monitors function is based on the proven and dependable differential pressure principle. This is perhaps the oldest and most widely used principle for flow metering, mainly because of its simplicity and its relatively low cost.
Electronic Type III
Electronic Type III
The Eletta Flow Monitors function is based on the proven and dependable differential pressure principle. This is perhaps the oldest and most widely used principle for flow metering, mainly because of its simplicity and its relatively low cost.
Electronic Type IV
Electronic Type IV
The Eletta Flow Monitors function is based on the proven and dependable differential pressure principle. This is perhaps the oldest and most widely used principle for flow metering, mainly because of its simplicity and its relatively low cost.
Pipe Sections
Pipe Sections
The Instrument consists of two parts mainly, i.e. the Pipe Section and the Control Unit. The Pipe Section is the part that is to be mounted in the process pipe and the Control Unit is mounted directly (standard) or remote to the Pipe Section.
New！coming soon...
New！coming soon...
New！coming soon...

Message

Need to leave a message

Username used for comment:
客户留言
Description:
Verification Code
×

CopyRight © 2022 Elita (Beijing) Instrument Co., Ltd. All Rights Reserved.

京ICP备16002435号
By: www.xinnet.com