×

Search

Search

产品中心

product center

Product Center

/
/
/
EB88 series magnetic float Level transmitter
All categories
浏览量:
1000

EB88 series magnetic float Level transmitter

EB88 magnetic liquid level transmitter is composed of reed switch, precision resistor and amplifying and converting circuit. When the magnetic line of force of the magnetic float acts on a certain position of the liquid level sensor, the reed switch in the position is closed, and the magnetic float follows the liquid level (Interface) height change. Through the amplification and transformation circuit, the liquid level (Interface) height change is converted into a linear 4 ~ 20mA signal output to realize the detection and transmission of the liquid level (Interface) position signal. EBII series has excellent long-term stability
零售价
0.0
市场价
0.0
浏览量:
1000
产品编号
Category: Level Measurement
数量
-
+
库存:
所属分类
Level Measurement
1
Message
Details
[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[产品参数, 参数]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

Product features

The structure is simple, stable and reliable with good repeatability;

It is not affected by the physical and chemical state of the measured medium. Such as: conductivity, dielectric constant, foam, pressure, temperature, evaporation, boiling, bubble influence;

Different materials are selected, which can be used in various corrosive, flammable, explosive, toxic, highly radioactive and dirty medium environments;

Liquid level measurement or interface measurement of two different density media;

Explosion proof structure design, suitable for explosive environment.

2-wire 4-20mA current output, with 0.56 "LED digital display, convenient for remote observation at night.

Applications

EB88 series is widely used in various liquid storage tanks, reaction tanks, liquid in fermentation tanks, oil products, strong and weak acid-base solutions and other high and low pressure containers in petroleum, chemical, oilfield, pharmaceutical, food and other industries. It is compatible with 304, 316L, 1Cr18Ni9Ti, 0Cr18Ni9, 304 + PTFE, 00Cr17Ni14Mo2, PP and other materials Interface measurement, transmission and display of two different media.

未找到相应参数组,请于后台属性模板中添加

Related products

 Vortex Street Flowmeter
Vortex Street Flowmeter
As a kind of velocity flowmeter, vortex flowmeter is widely used in petroleum, chemical industry, electric power, light industry and power heating.
 Mechanical Type I
Mechanical Type I
The Eletta Flow Monitors function is based on the proven and dependable differential pressure principle. This is perhaps the oldest and most widely used principle for flow metering, mainly because of its simplicity and its relatively low cost.
 Mechanical Type II
Mechanical Type II
The Eletta Flow Monitors function is based on the proven and dependable differential pressure principle. This is perhaps the oldest and most widely used principle for flow metering, mainly because of its simplicity and its relatively low cost.
 Electronic Type I
Electronic Type I
The Eletta Flow Monitors function is based on the proven and dependable differential pressure principle. This is perhaps the oldest and most widely used principle for flow metering, mainly because of its simplicity and its relatively low cost.
 Electronic Type II
Electronic Type II
The Eletta Flow Monitors function is based on the proven and dependable differential pressure principle. This is perhaps the oldest and most widely used principle for flow metering, mainly because of its simplicity and its relatively low cost.
 Electronic Type III
Electronic Type III
The Eletta Flow Monitors function is based on the proven and dependable differential pressure principle. This is perhaps the oldest and most widely used principle for flow metering, mainly because of its simplicity and its relatively low cost.
 Electronic Type IV
Electronic Type IV
The Eletta Flow Monitors function is based on the proven and dependable differential pressure principle. This is perhaps the oldest and most widely used principle for flow metering, mainly because of its simplicity and its relatively low cost.
 Pipe Sections
Pipe Sections
The Instrument consists of two parts mainly, i.e. the Pipe Section and the Control Unit. The Pipe Section is the part that is to be mounted in the process pipe and the Control Unit is mounted directly (standard) or remote to the Pipe Section.
 New!coming soon...
New!coming soon...
New!coming soon...

Message

Need to leave a message

Username used for comment:
客户留言
Description:
Verification Code
×

CopyRight © 2022 Elita (Beijing) Instrument Co., Ltd. All Rights Reserved.