- All
- Product Management
- News
- Introduction
- Corporate Outlets
- FAQ
- Corporate Video
- Corporate Brochure
Electromagnetic flow meter manufacturer experience sharing: storage tips after use
Published Time:
2024-10-18 11:52
Source:
Electromagnetic flow meter As a high-precision flow measurement instrument, proper storage after use is crucial. This not only extends its service life but also ensures the stability of its performance and the accuracy of measurements. As a manufacturer of the well-known brand eletta, we have accumulated rich experience and will share with you here Electromagnetic flow meter Storage tips after use.
First, before storing the electromagnetic flow meter, it must be thoroughly cleaned. Use a mild detergent and a soft damp cloth to gently wipe the outer casing and sensor surface of the flow meter to remove any adhering dirt, impurities, and residual media. Pay special attention to the measuring electrode part of the sensor, ensuring that no foreign objects are blocking or adhering to it, so as to avoid affecting the subsequent measurement accuracy.
After cleaning, drying is necessary. Avoid residual moisture causing internal components to rust or corrode. Clean compressed air can be used to dry various parts of the flow meter, especially the connectors and seals.
Next is the packaging process. Choosing the right packaging material is crucial for storing the electromagnetic flow meter. It is recommended to use packaging boxes or bags with moisture-proof and shock-proof functions. eletta brand electromagnetic flow meters usually come with specially designed packaging at the factory. If possible, try to use the original packaging for storage. Inside the packaging, an appropriate amount of desiccant can be added to absorb moisture from the air and maintain a dry environment inside the packaging.
The storage environment is one of the important factors affecting the performance of the electromagnetic flow meter. A dry, well-ventilated, and suitable temperature location should be chosen. Avoid storing the flow meter in high-temperature, high-humidity, corrosive gas, or strong electromagnetic field environments. The ideal storage temperature is usually between -20℃ and 60℃, and the relative humidity should be controlled below 85%.
If the storage time is long, it is recommended to regularly check the electromagnetic flow meter. Every once in a while, open the packaging and check for any damage or deformation in the appearance, and whether there is any looseness or corrosion in the internal components. At the same time, re-dry and replace the desiccant to ensure a dry storage environment.
Accessories and cables for the electromagnetic flow meter also need to be properly stored. Sort the accessories and place them in a dedicated bag or box, and store them with the flow meter. Cables should be avoided from excessive bending or pulling to prevent damage to the internal wires.
During storage, care should be taken to avoid mechanical damage to the electromagnetic flow meter. Do not stack heavy objects on the flow meter, and do not allow it to be subjected to violent collisions or vibrations.
In addition, for electromagnetic flow meters that have already installed batteries, if they are not used for a long time, the batteries should be removed to prevent battery leakage from damaging the instrument.
Finally, keeping storage records is also very important. Recording the time, location, environmental conditions, and inspection status, etc., helps track the storage status of the electromagnetic flow meter and provides a reference for subsequent use and maintenance.
In summary, correct storage techniques can effectively protect the electromagnetic flow meter, ensuring that it maintains good performance and accuracy when it needs to be used again. As the eletta brand, we are committed to providing users with high-quality products and professional services. We hope that these storage tips will help you better protect and manage your electromagnetic flow meter, ensuring its long-term stable and reliable operation.
Company Address:
602A, Block A, IFC Tower, No. 8A, Jianguomen Waidajie, Beijing 100022, China
Telephone:010-67189590
Fax:010-67181620
Email:eletta@eletta.cn
Quick Navigation:
Follow Us