- All
- Product Management
- News
- Introduction
- Corporate Outlets
- FAQ
- Corporate Video
- Corporate Brochure
Standard operating procedure for using a flow meter to measure aviation kerosene refueling
Published Time:
2024-10-11 12:30
Source:
In the field of aviation kerosene refueling, ensuring accurate measurement and safe operation is crucial. Analysis measurement oil flow meter As a key measuring device, its standard operating procedure is of great significance to ensuring the accuracy and reliability of the refueling work. This article will detail the analysis measurement oil flow meter Standard operating procedure in aviation kerosene refueling, especially in combination with the characteristics of relevant products from the well-known brand eletta.
First, when using the analysis oil flow meter Before that, sufficient preparation is required. Carefully check the appearance of the flow meter to ensure that there are no obvious signs of damage, deformation, or leakage. At the same time, check whether the connecting parts are firm and whether the seals are intact. For the eletta brand oil flow meter Check the specific markings and certifications according to the requirements of its product manual to ensure that the equipment meets the relevant standards and specifications for aviation kerosene refueling.
Next, install the equipment. The choice of installation location is crucial and should follow the design requirements of the aviation kerosene refueling system, usually in a section with a longer straight pipe and stable flow. During installation, ensure that the flow meter is coaxial with the pipe and the connection is tight to avoid leakage. Eletta oil flow meters may have unique installation guides and accessories; be sure to follow their instructions to fully utilize their performance advantages.
After installation, perform calibration and debugging. This is a key step in ensuring the accuracy of the flow meter measurement. Using standard calibration devices and methods, according to eletta flow meter According to the accuracy requirements and calibration specifications of the eletta flow meter, perform zero-point calibration and range calibration. During the calibration process, record the relevant data and compare it with the standard values to ensure that the error is within the allowable range.
Before formally refueling aviation kerosene, a pre-operation check of the entire system is also required. Open the relevant valves, start the oil pump, observe the working status of the flow meter, and check for any abnormal vibrations, noise, or unstable readings. At the same time, check the display instruments and control system that are matched with the flow meter to confirm that the data transmission is accurate.
When everything is ready, start the aviation kerosene refueling operation. During the refueling process, the operator should closely monitor the changes in the flow meter readings. Eletta brand flow meters usually have a clear and easy-to-read display screen that can display key data such as flow rate and cumulative amount in real time. The operator should control the refueling speed and total amount according to the requirements of the refueling task to ensure that the specified refueling parameters are met.
During the refueling process, the flow meter should also be inspected regularly. Check whether parameters such as its operating temperature and pressure are within the normal range. For eletta flow meter If it is equipped with remote monitoring and alarm functions, ensure that the relevant functions are operating normally to promptly discover and handle any abnormal situations that may occur.
After refueling, close the relevant valves and equipment and stop the oil pump operation. Perform post-processing work on the flow meter, such as cleaning the surface oil stains and impurities to prevent corrosion and damage to the equipment. At the same time, record and archive the measurement data of the flow meter for subsequent analysis and traceability.
Finally, regularly maintain and maintain the positive displacement flow meter. According to the maintenance manual provided by the eletta brand, perform regular inspections, cleaning, lubrication, and parts replacement. This helps extend the service life of the flow meter and maintain its stable performance and measurement accuracy.
In summary, the standard operating procedure for positive displacement flow meters in aviation kerosene refueling involves multiple steps, from preparation, installation and debugging, refueling operation to later maintenance. Each step must be strictly carried out in accordance with relevant specifications and brand requirements. By correctly using high-quality oil flow meters from brands such as eletta and following the standard operating procedures, the efficiency and safety of aviation kerosene refueling can be effectively improved, providing strong support for the smooth operation of air transportation.
Company Address:
602A, Block A, IFC Tower, No. 8A, Jianguomen Waidajie, Beijing 100022, China
Telephone:010-67189590
Fax:010-67181620
Email:eletta@eletta.cn
Quick Navigation:
Follow Us