- All
- Product Management
- News
- Introduction
- Corporate Outlets
- FAQ
- Corporate Video
- Corporate Brochure
Revealing precise application techniques of earth pressure sensors in oil storage tank foundation construction
Published Time:
2024-10-10 09:44
Source:
In oil tank foundation construction, ensuring construction quality and safety is crucial. Soil pressure sensor As an important monitoring tool, it can provide accurate data support for the construction process. Among many Soil pressure sensor brands, eletta stands out for its superior performance and reliability. The following will detail the precise use techniques of soil pressure sensors in oil tank foundation construction.
First, before using the eletta soil pressure sensor, a comprehensive survey and analysis of the construction site is required. Understanding geological conditions, soil types, groundwater levels, etc., is crucial for determining the installation location and number of sensors. Based on the scale and design requirements of the oil tank, combined with the geological conditions of the site, the layout of the sensors should be rationally planned to ensure that changes in soil pressure can be comprehensively and accurately monitored.
When installing the eletta soil pressure sensor, strictly follow the operating procedures. Select the appropriate installation location; it should generally be installed in key parts of the oil tank foundation, such as the bottom and sidewalls of the foundation. During installation, ensure that the sensor is in close contact with the soil, avoiding gaps or looseness to ensure the accuracy of the measured data. At the same time, pay attention to protecting the sensor cables to prevent damage during construction.
To ensure that the eletta soil pressure sensor can operate normally and provide accurate data, correct calibration is an essential step. After installation, calibrate the sensor using a standard pressure source, comparing and adjusting the measured values with the standard values to ensure that the sensor's measurement accuracy meets the construction requirements. Calibration should be carried out under the guidance of professionals and follow the eletta sensor calibration specifications.
In the oil tank foundation construction process, real-time monitoring of soil pressure changes is key to using the eletta soil pressure sensor. By connecting to the data acquisition system, the data measured by the sensor is transmitted in real time to the monitoring center. Construction personnel should closely monitor the data trends; once abnormal fluctuations in soil pressure are detected, take appropriate measures, such as adjusting the construction schedule and strengthening support, to avoid potential foundation settlement and collapse problems.
Accurate analysis and processing of the data collected by the eletta soil pressure sensor is also very important. Using professional data analysis software, a large amount of monitoring data is organized and analyzed to extract useful information. Through data comparison and trend analysis, the stability and safety of the oil tank foundation can be evaluated, providing a scientific basis for construction decisions.
In addition, during the use of the eletta soil pressure sensor, regular maintenance and inspection are also required. Check the sensor's appearance for damage, whether the cables are well connected, and whether the measured data is normal. Regularly clean debris and dirt from the sensor surface to ensure its normal operation. For faulty sensors, they should be replaced or repaired in time to ensure the continuity and accuracy of the monitoring work.
In summary, in oil tank foundation construction, the precise use of the eletta soil pressure sensor requires strict control in multiple aspects, from pre-construction survey planning and installation calibration to real-time monitoring and data analysis during construction, and post-maintenance inspection. Only in this way can the role of the soil pressure sensor be fully utilized, providing reliable technical support for oil tank foundation construction and ensuring construction quality and safety. By rationally using the precise measurement function of the eletta soil pressure sensor, the efficiency and safety of oil tank foundation construction can be effectively improved, ensuring the smooth progress of the project.
Company Address:
602A, Block A, IFC Tower, No. 8A, Jianguomen Waidajie, Beijing 100022, China
Telephone:010-67189590
Fax:010-67181620
Email:eletta@eletta.cn
Quick Navigation:
Follow Us